HW group HWg-WLD : Ανιχνευτής διαρροής υγρών
HWg-WLD is 2D area
water leakage detection sensor with Ethernet output. Liquid is detected along the entire length of
the sensing cable. Detection cable is very easy to extend.
Water leakages are serious issue in modern buildings and
data centers with double floors. HWg-WLD
detects water leaks or water floods along the entire length of the sensing
cable. The sensing cable detects even the smallest volume of water, ethylene
glycol, or other conductive liquid. The HWg-WLD can be ordered in two versions
depending on the supply of power (power adapter or PoE IEEE 802.3af). Two
meters of WLD detection cable is included in the delivery.
2D
means whole room surface liquid detection. The sensing cable detects as little
as a few drops of the liquid, and can be used to detect condensation. After
flooding, the cable can be dried and reused. The WLD sensing cable can be
extended anywhere and several times by non-sensing prolong cable. It can
significantly reduce cost of the whole installation.
HWg-WLD features a built-in web server and SNMP support. In
case of an alarm, the device sends an e-mail or SNMP trap.
Alarms can be also signaled by switching a remote relay over
the Ethernet. When a leak is detected, HWg-WLD activates a relay of a remote
Poseidon or Damocles unit (Box-2-Box mode).
· 2D
area liquid leak detection, 2 – 85 m
sensing cable length
· Alarm
alerts by e-mail, SNMP trap, or by activating a relay output
· Detects
even the smallest volumes of liquids, sensing cable can be dried and reused
Typical
applications involve monitoring of coolant piping in air conditioning systems
or water detection around pipes in technical areas. The water leak sensing
cable can be wrapped around the piping, suspended under the piping, or laid on
the bottom of a pipe duct.
