HWg-WLD: Water leak detector (Web, SNMP, Email)

HW group HWg-WLD : Ανιχνευτής διαρροής υγρών 

HWg-WLD is 2D area water leakage detection sensor with Ethernet output.  Liquid is detected along the entire length of the sensing cable. Detection cable is very easy to extend.

Water leakages are serious issue in modern buildings and data centers with double floors.  HWg-WLD detects water leaks or water floods along the entire length of the sensing cable. The sensing cable detects even the smallest volume of water, ethylene glycol, or other conductive liquid. The HWg-WLD can be ordered in two versions depending on the supply of power (power adapter or PoE IEEE 802.3af). Two meters of WLD detection cable is included in the delivery.

2D means whole room surface liquid detection. The sensing cable detects as little as a few drops of the liquid, and can be used to detect condensation. After flooding, the cable can be dried and reused. The WLD sensing cable can be extended anywhere and several times by non-sensing prolong cable. It can significantly reduce cost of the whole installation.

HWg-WLD features a built-in web server and SNMP support. In case of an alarm, the device sends an e-mail or SNMP trap. 

Alarms can be also signaled by switching a remote relay over the Ethernet. When a leak is detected, HWg-WLD activates a relay of a remote Poseidon or Damocles unit (Box-2-Box mode). 

·       2D area liquid leak detection, 2 – 85 m sensing cable length

·       Alarm alerts by e-mail, SNMP trap, or by activating a relay output

·       Detects even the smallest volumes of liquids, sensing cable can be dried and reused

Typical applications involve monitoring of coolant piping in air conditioning systems or water detection around pipes in technical areas. The water leak sensing cable can be wrapped around the piping, suspended under the piping, or laid on the bottom of a pipe duct.